What the MaxiJet Le Crepuscule is built to do
The S.T. Dupont MaxiJet Montecristo Le Crepuscule Lighter is a limited-edition single-jet torch finished in a twilight gradient lacquer, with the Montecristo emblem stamped in gold on one side and a sun-and-moon motif on the reverse. It is part of S.T. Dupont's Montecristo Trilogy, so the finish is the point as much as the flame.
The working side is straightforward: a powerful single torch jet delivers concentrated heat for toasting and lighting a cigar, the shaped body sits naturally in the hand, and a side trigger allows one-handed ignition. S.T. Dupont lists wind-resistant performance, which is why this design suits outdoor lighting rather than a still indoor table.
The details that shape how you handle it
- S.T. Dupont MaxiJet Montecristo Le Crepuscule Lighter: The lighter is refillable using S.T. Dupont's black gas refill. Buy the matching refill before you need it; a torch lighter with no gas on hand is a display piece, and the supplied record names this specific refill.

S.T. Dupont MaxiJet Montecristo Le Crepuscule Lighter - S.T. Dupont MaxiJet Montecristo Le Crepuscule Lighter: A powerful single torch jet delivers concentrated heat for quick cigar toasting and lighting. A concentrated jet rewards a short, deliberate pass over the foot rather than a long hold, which keeps the lacquer and the cigar foot away from prolonged heat.
- S.T. Dupont MaxiJet Montecristo Le Crepuscule Lighter: Side trigger ignition allows straightforward, one-handed operation. You can light with the cigar in one hand and the lighter in the other, so you are not juggling a cap or a cutter mid-light.
- S.T. Dupont MaxiJet Montecristo Le Crepuscule Lighter: Its warm orange to darker twilight colour fade reflects the Le Crepuscule sunset theme. The gradient lacquer is the collector-facing surface, so handling and storage habits should protect the finish rather than the internals alone.
A sensible refill routine with S.T. Dupont black gas
The supplied record confirms the refill type but does not include a step-by-step refilling procedure, so treat the sequence below as practical handling advice rather than a manufacturer instruction. Check your lighter's own documentation for anything specific to the valve.
- Refill before the flame sputters: A torch that is running dry tends to light unevenly. Top up with S.T. Dupont black gas while ignition is still crisp rather than waiting for a weak flame.
- Work in a ventilated spot away from flame: Refilling releases gas. Do it away from open flame, cigars and anything hot, and let the lighter settle before you trigger it.
- Keep the can upright and seated: Hold the refill can vertical and aligned with the fill valve so gas goes in rather than spraying past the seal.
- Wipe the fill area afterwards: A soft cloth removes any gas residue from the lacquer around the valve, which keeps the twilight finish looking clean.
Lighting a cigar with a single concentrated jet
Toast the foot first: hold the cigar above the flame rather than in it, and let the jet's concentrated heat warm the tobacco evenly before you draw. Because the MaxiJet produces a powerful single torch flame, a brief pass is usually enough; a long hold risks scorching the wrapper and overheating the lighter's front end.
Keep the lighter moving and at a slight distance so heat does not sit on one spot of the lacquer. The wind-resistant jet is an advantage outdoors, but it also means the flame stays strong in a breeze, so watch where the heat is pointed when you set it down.
Cleaning and care for the lacquer and jet
The supplied information does not include a cleaning procedure, solvent list or flame-adjustment instructions, so the following are handling habits rather than confirmed service steps. If the jet becomes weak or the flame behaves unusually, contact S.T. Dupont service rather than probing the burner yourself.
- Wipe the body with a soft, dry cloth: Fingerprints and gas residue come off the gradient lacquer without abrasives. Avoid polishing compounds that could dull the gold-stamped Montecristo emblem or the sun-and-moon motif.
- Keep the jet area free of lint: Pocket lint and ash near the burner can disturb the flame. A gentle brush or a puff of air around the outside of the jet is safer than inserting anything into the nozzle.
- Store it away from heat and loose metal: A pouch or the original box protects the lacquer from keys and coins, and keeps the lighter out of direct sun or a hot car where the finish and gas are both under stress.
- Do not dismantle the burner: The record does not supply internal service instructions. Treat the jet assembly as sealed and let an authorized repairer handle anything beyond exterior cleaning.
Flame adjustment: what the record does and does not confirm
The S.T. Dupont MaxiJet Montecristo Le Crepuscule is described as a single-jet torch with side-trigger ignition, but the supplied record does not confirm an adjustable flame control or give a setting procedure. Do not assume a particular dial position or force any control you are unsure about.
If your lighter has a flame adjustment, follow the documentation that came with it and adjust in small increments with the lighter cool. If it does not, match your lighting technique to the fixed jet: shorter passes, more distance, and let the tobacco come up to temperature gradually.
Where the supplied information stops
This guide covers what the catalog record confirms: the single torch jet, side trigger, wind resistance, refillable construction with S.T. Dupont black gas, and the Le Crepuscule lacquer finish. It does not include a manufacturer refill procedure, a cleaning schedule, flame-adjustment steps, gas capacity, or warranty terms.
For anything beyond those confirmed points, use the documentation supplied with the lighter or contact S.T. Dupont directly. Treat the habits above as sensible ownership practice, not as instructions issued by the manufacturer.


