Start With What the Le Feu Brick Black Actually Is
The Les Fines Lames Le Feu Brick Black is a compact, refillable single-flame cigar lighter. Its black lacquered stainless steel body measures 6.6 x 4 x 1 cm and weighs 90 g, so it sits slim in the hand but still feels substantial. The business end is a 2 cm blue torch flame, adjustable for intensity, with a visible fuel window on the body.
That combination tells you most of what you need to know before your first light: it is a focused single-jet torch rather than a soft flame, it runs on standard butane, and you can check the fuel level without guessing. The guide below walks through setup, flame adjustment, refilling, and the habits that keep a torch lighter working.
Specs That Shape Your Setup
- Les Fines Lames Le Feu Brick Black: Single jet with a 2 cm blue torch flame A concentrated single flame is built for toasting and lighting a cigar; you aim it, you do not bathe the whole foot in heat.

Les Fines Lames Le Feu Brick Black - Les Fines Lames Le Feu Brick Black: Adjustable flame intensity You can dial the output to suit how you light rather than accepting one fixed setting.
- Les Fines Lames Le Feu Brick Black: Visible fuel window You can check the butane level at a glance before you sit down to smoke, instead of discovering an empty lighter mid-toast.
- Les Fines Lames Le Feu Brick Black: Refillable with standard butane gas Refilling is part of normal ownership, not a workaround; the fuel window makes it easy to know when.
A Simple First-Use Sequence
The supplied product information confirms the lighter’s features but does not include a manufacturer’s operating manual. The steps below are practical habits for a single-jet torch lighter of this type, not a reproduction of official instructions. If the lighter arrives with a printed guide, follow that first.
- Check the fuel window before anything else: Look at the visible fuel window on the body. If the butane level is low, refill before you try to light; a torch that is running dry can sputter rather than give you a clean flame.
- Set the flame adjuster to a low starting point: The Le Feu Brick Black has adjustable flame intensity. Begin low and increase only as needed. A 2 cm torch flame is already powerful, so you rarely need it at maximum for cigar work.
- Light away from your face and over a safe surface: Point the jet away from yourself and anyone nearby, and keep the lighter clear of your face and hair. Torch flames are concentrated and not always visible in bright light.
- Toast the foot of the cigar before drawing: Hold the cigar above the flame rather than plunging it in, rotating it so the foot heats evenly. Then bring the flame closer as you begin to draw. The single jet gives you a narrow, controllable heat source for this.
- Let the lighter cool before you put it away: The metal body and the area around the jet can stay hot after use. Give it a moment before pocketing it or setting it down against anything flammable.
How to Adjust the Flame Without Overdoing It
Flame adjustment is the setting most likely to cause trouble if you ignore it. The Le Feu Brick Black lets you control output, which is useful when you move between indoor and outdoor lighting or between a quick touch-up and a full toast. Start with a modest flame and increase in small increments, testing the result before you commit to a larger flame.
A taller flame is not automatically better. The 2 cm blue torch flame is already described as powerful and concentrated, so a lower setting often gives you more control and less risk of scorching the wrapper. If the flame stutters or looks weak even with fuel in the window, the adjuster may be too low or the lighter may need bleeding and refilling; see the refill section below.
Refilling a Torch Lighter: What to Expect
The Le Feu Brick Black is refillable with standard butane gas. The supplied record does not include a step-by-step refill procedure, so treat the following as general torch-lighter practice rather than a manufacturer’s instruction. Check the printed guide if one is included.
- Use standard butane, not multipurpose fuel: The catalog specifies standard butane gas. Avoid fuel blends intended for other appliances; they can clog a jet lighter.
- Refill in a well-ventilated area, away from flame: Butane is flammable. Do not refill near an open flame, a lit cigar, or any ignition source, and do not smoke while refilling.
- Bleed residual pressure before refilling if the flame is weak: Many torch lighters benefit from releasing leftover gas before a refill. The supplied information does not confirm a specific bleed valve on this model, so consult the included guide or the retailer if you are unsure.
- Let the lighter reach room temperature after refilling: Cold butane does not vaporize as readily. Give the lighter a few minutes after a refill before you expect a steady flame.
- Check the fuel window after refilling: The visible window lets you confirm the level at a glance, so you are not guessing whether the refill took.
Everyday Care for a Black Lacquered Torch
The Le Feu Brick Black pairs a black premium lacquer finish with a stainless steel body and an etched Les Fines Lames logo. The lacquer is the part most likely to show wear, so keep the lighter away from keys, coins, and other hard objects in a pocket or bag. A soft cloth is enough for normal fingerprints and dust; avoid abrasive polishes that could dull the finish.
Keep the jet area free of lint and ash. A concentrated torch flame can be disturbed by debris around the nozzle, and a quick visual check before each light is a sensible habit. The lighter carries a two-year international warranty according to the catalog, so if you notice a mechanical fault rather than normal wear, contact the retailer rather than attempting a repair yourself.
Safety Habits That Matter With a Torch Lighter
- Respect the invisible flame: A blue torch flame can be hard to see in bright sunlight. Treat the lighter as lit until you are certain it is off.
- Keep it away from your face and clothing: Point the jet away from yourself and others when lighting, and never lean over the flame to check it.
- Do not leave it in direct sun or a hot car: Pressurized butane and lacquered finishes both suffer in high heat. Store the lighter at normal room temperature.
- Let it cool before storage: The metal body can retain heat after a long lighting session. Allow it to cool before putting it in a pocket or case.
- Keep out of reach of children: A torch lighter is not a toy, and the concentrated flame warrants the same care as any open flame.
Where the Supplied Information Stops
The catalog confirms the Le Feu Brick Black’s dimensions, weight, single-jet 2 cm flame, adjustable intensity, fuel window, standard butane refill, lacquered stainless steel body, and two-year international warranty. It does not include a manufacturer’s lighting or refilling procedure, a specified bleed valve, or jurisdiction-specific rules for carrying or using a torch lighter. If you need those details, check the printed materials that arrive with the lighter or ask the retailer directly. The habits above are a practical starting point, not a substitute for the maker’s own guidance.


